TWISTER B4 BUCKER

$22,999.00

Overview

Bucking Herbs on a large scale sucks. But it doesn’t have to. The Twister B4 ‘Bucker’ raises the bar on single piece flow by adding advanced, patent-pending Herbs bucking technology to your process flow, replacing the work that crews of 5-7 used to do by hand. Process up to 150+ lbs/hr (fully hydrated) with one unit!

In Stock

Category:

Description

TWISTER
B4 BUCKER

Designed for Your Facility

The B4 ‘Bucker’ was engineered to meet the needs of everyone that contributes to a successful harvest at your facility. Click the [+] to the right to sort and prioritize the key features to match common roles within your facility.

Features:

  • 150+ lbs/hr throughput (speeds of up to 30 ft/sec)
  • Quick and easy changeouts with removable cartridges
  • Patent-pending “Active Gearing” drivetrain reduces jams and downtime
  • Washdown Rated (Pressure washable)
  • SafeFeed™ adaptor on the entry holes prevents injury
  • Emergency stop. Clear and within reach.
  • Easy to use. Ergonomically designed. Easy to load and operate.
  • Easy to clean. Breaks down in less than 2 minutes. Easy access to components.
  • Minimal training required. Manuals, videos, and tips available on the website.
  • Buck dry or fully hydrated.

PRODUCT SPECS

TWISTER B4 BUCKER

Input Voltage 120V, 60 Hz Single Phase
Current Draw < 2A Operating 6A Max
Drive Motor 1HP
Motor RPM 262-1750 RPM
Weight 285lbs / 130kg
Shipping Weight (w/o stand) 338lbs / 154kg
Unit Length 37.5in / 96cm
Unit Width 13in / 33cm
Unit Height 14.5in / 37cm
Circuit Breaker Required 15A, 120V
Connector (plug) NEMA 5-15P
Roller Sets Neoprene Rubber
Maintenance Interval > 1000 hours
Pull Speed 10 – 30in/s
Pull Strength > 430 lbs
Extension Cord 14/3 AWG (minimum AWG size)
715m / 50ft max length

TWISTER B4 BUCKER FEATURES

Feed Throughput 150 lbs/hr (Hydrated)
Feed Entry Sizes Plate 1: .250″, 375″, .450″
Plate 2: .315″, .550″, .787″
Active Gearing System Yes
Swappable Cartridge Yes
Feed Types Wet/Dry
Variable Speed Yes
Motor Pulse Yes
Reverse Operation Yes
Duty Cycle Continuous
Maintenance Interval > 1000 hours
Pull Speed 10 – 30 in/s
Pull Strength > 430 lbs
Primary Material (Cartridge) 304 Stainless
GMP Compliant YES
CSA Certified Yes
UL Certified Yes